Pre-milled Blank

Titanium, pre-formed

Titanium blanks pre-formed to standard implant connection geometries. Reduces milling time versus full titanium disk milling while maintaining the accuracy and biocompatibility of a fully custom milled abutment. Used with 5X-200, 5X-450, 5X-400, 5X-500L, and compatible A Series machines.

Ti-Base

Implant interface base

Ti-Base is a titanium abutment interface component used for hybrid (screw-retained) zirconia or ceramic crowns. The zirconia crown is bonded to the Ti-Base in the lab, then the combined unit is screwed directly into the implant. Eliminates cement from the restoration entirely. Sized to specific implant connection specifications.

Analog

Lab implant replica

Implant analog (replica) used in the dental lab to replicate the implant fixture position in a physical model. Used with impression or model workflows where the final restoration design requires accurate implant orientation. Arum analogs match their scanbody and component line for consistent dimensional accuracy.

Screw

Prosthetic retention screw

Prosthetic screws for securing screw-retained restorations and abutments to implant fixtures. Arum screws are sized to match their implant connection interfaces and are required to achieve specified torque values for long-term retention. Connection-specific — contact us with your implant system for the correct screw specification.

Driver (Lab / Clinical)

Torque and seating tool

Arum offers both lab-side and clinical-side drivers for seating and torquing Arum prosthetic screws and components. Lab drivers are used during restoration fabrication and try-in; clinical drivers are for chairside final placement. Matched to the specific screw head geometry of Arum’s component line.